Alera-lighting MM, MMA Surface Mount Manuel d'utilisateur télécharger pdf (Page 2)

Page 2/2 Rev. 01/02/14 RECESSED / MM, MMA SM TID

MM, MMA SURFACE MOUNT

Technical Installation Data

701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com

CONNECTION INSTRUCTIONS

1. Attach connector brackets to reector on

each housing using the #8 screws. Ensure

the angles are in the same direction on each

housing. (4 total)

2. Insert Top Light Seal halfway into one of the

Housings.

3. Insert Aligner with Pem Studs into the "C"

channel slots on one of the housings (2

total)

4. Use the #8 nuts to secure the aligner to the

housing A. (2 total)

5. Attach each Light Seal to the Aligner using

the #8 nuts. Do not tighten the nut at this

point. (2 total)

6. Butt Housing B against Housing A while

engaging Top Light Seal and electrically

connecting in-row wiring.

7. Engage the connector brackets with the

screws provided. Tighten the screws until

the housings are pulled together.

8. Secure the Aligner in Housing B with #8

nuts provided and tighten.

9. Tighten the nuts on the side light shields.

Housing A

Housing B

Aligner w/ Pem

Studs (2 places)

#8 Nuts

(6 Places)

Light Seal (2 Places)

#8 Screws (6 places)

Conn Brackets (4 Places)

1 2

Pas de commentaire

Alera-lighting MM, MMA Surface Mount Manuel d'utilisateur Page 2